Thermal stresses in radiant tubes due to axial, circumferential and radial temperature distributions MA Irfan, W Chapman Applied Thermal Engineering 29 (10), 1913-1920, 2009 | 111 | 2009 |
Time resolved friction during dry sliding of metal on metal MA Irfan, V Prakash International Journal of Solids and Structures 37 (20), 2859-2882, 2000 | 83 | 2000 |
Porosity reduction and mechanical properties improvement in die cast engine blocks MA Irfan, D Schwam, A Karve, R Ryder Materials Science and Engineering: A 535, 108-114, 2012 | 78 | 2012 |
The Techno-Economic Potential of Saudi Arabia's Solar Industry MAI Sulaiman AlYahya Renewable and Sustainable Energy Reviews 55 (C), 697-702, 2016 | 64 | 2016 |
Design methodology of organic Rankine cycle for waste heat recovery in cement plants A Ahmed, KK Esmaeil, MA Irfan, FA Al-Mufadi Applied Thermal Engineering 129, 421-430, 2018 | 61 | 2018 |
Analysis from the New Solar Radiation Atlas for Saudi Arabia MA AlYahya, S. and Irfan Solar Energy 130, 116-127, 2016 | 59 | 2016 |
Novel experimental techniques for investigating time resolved high speed friction S Rajagopalan, MA Irfan, V Prakash Wear 225, 1222-1237, 1999 | 50 | 1999 |
Thermal stresses in radiant tubes: A comparison between recuperative and regenerative systems M Irfan, W Chapman Applied Thermal Engineering 30 (2), 196-200, 2010 | 47 | 2010 |
COMPARISON OF LINKER AND DIETERICH FRICTION MODELS WITH PRAKASH MODELS FOR SIMULATION OF HIGH-SPEED FRICTION H Ullah, MA Irfan Journal of Engineering and Applied Sciences (JEAS), University of …, 2005 | 42* | 2005 |
The Role of Saudi Universities in Achieving the Solar Potential 2030 Target S AlYahya, MA Irfan Energy Policy 91, 325-328, 2016 | 39 | 2016 |
Design Methodology of Heat Recovery Steam Generator in Electric Utility for Waste Heat Recovery Ahmed, A., Khodery, K., Irfan, M. A., Mufadi, F. A. International Journal of Low-Carbon Technologies, 2018 | 33 | 2018 |
Assembly features: definition, classification, and instantiation EB Hamidullah, MA Irfan Emerging Technologies, 2006. ICET'06. International Conference on, 617-623, 2006 | 32 | 2006 |
Dynamic deformation and fracture behavior of novel damage tolerant discontinuously reinforced aluminum composites MA Irfan, V Prakash International Journal of Solids and Structures 37 (33), 4477-4507, 2000 | 29 | 2000 |
Dynamic fracture of linear medium density polyethylene under impact loading conditions CF Martins, MA Irfan, V Prakash Materials Science and Engineering: A 465 (1), 211-222, 2007 | 26 | 2007 |
Contact Temperature During Sliding in Pressure-shear Impact MA Irfan, V Prakash PROCEEDINGS OF THE SEM SPRING CONFERENCE ON EXPERIMENTAL MECHANICS, 173-173, 1994 | 19 | 1994 |
New solar radiation atlas for Saudi Arabia S AlYahya, MA Irfan 2014 International Conference on Renewable Energy Research and Application …, 2014 | 18 | 2014 |
State and rate dependent friction laws for modeling high-speed frictional slip at metal-on-metal interfaces H Ullah, MA Irfan, V Prakash Journal of tribology 129 (1), 17-22, 2007 | 16 | 2007 |
Transient thermo-mechanical interactions during high-speed slip at metal-on-metal interfaces NS Liou, M Okada, MA Irfan, V Prakash Optics and lasers in engineering 40 (4), 393-437, 2003 | 13 | 2003 |
Assembly Features: definition, classification, and usefulness in sequence planning H Ullah, ELJ Bohez, MA Irfan International Journal of Industrial and Systems Engineering 4 (2), 111-132, 2009 | 12 | 2009 |
Dynamic crack propagation and arrest in rapid prototyping material U Ibrahim, MA Irfan Rapid Prototyping Journal 18 (2), 154-160, 2012 | 8 | 2012 |